Datasheet //top\\: Hw-044

: Rated for industrial temperature ranges from -40°C to +85°C . Interface and Connectivity

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Connecting HCM375B-232-68N with arduino - Page 4

The HW-044 primarily serves as a breakout and driver board. Depending on the specific factory production run, it is most commonly populated with either the array or a specialized multi-channel optocoupler/voltage level shifter . hw-044 datasheet

(Note: Exact PCB footprints can vary slightly by manufacturer batch). 31.5 mm Width: 24.2 mm Height: 12.0 mm (including headers) Mounting Hole Diameter: 3.0 mm (M3 screw compatible) Troubleshooting and Best Practices

| Feature | HW-044 | TXS0108E | Simple voltage divider | |---------|--------|----------|------------------------| | Bidirectional | Yes | Yes | No (one-way only) | | Number of channels | 8 | 8 | N/A | | Automatic direction | Yes | Yes | No | | Max speed (safe) | ~200 kHz | ~1 MHz | Depends on resistors | | External pull-ups needed | No | No | Yes | | Cost | Low (~$1-2) | Medium (~$3-5) | Very low | : Rated for industrial temperature ranges from -40°C

: Simple 4-pin header for the microcontroller side, including: VCC : Power input. GND : Ground. TX : Transmit data. RX : Receive data.

| Module | Input | Channels | Power (5V, 4Ω) | SNR | Complexity | |--------|-------|----------|----------------|-----|-------------| | | I²S Digital | 1 | 3.2W | 94dB | Low (no ADC needed) | | LM386 | Analog | 1 | ~1W | 70dB | Very low | | PAM8302 | Analog | 1 | 2.5W | 85dB | Low | | MAX98306 | I²S | 2 (Stereo) | 2x3.7W | 93dB | Medium | | DFPlayer Mini | Serial/MP3 | 1 | 3W | 80dB | Medium (with SD card) | If you share with third parties, their policies apply

The is a highly popular, low-cost RS232 to TTL serial converter board designed to bridge the communication gap between legacy industrial machinery and modern microcontrollers . Powered by the robust MAX3232 transceiver IC , this module effortlessly converts high-voltage RS232 signals (up to ±15V) into safe, low-voltage TTL signals (3.0V to 5.5V) compatible with platforms like Arduino, ESP32, STM32, and Raspberry Pi.