Plc Usb Driver Install - Xinje
Xinje does not distribute the USB driver as a separate download on their main website. Instead, the driver is . You need to have XDPPro or AutoShop installed first.
Windows will scan the folder, locate the driver file (often xinje_usb.inf ), and install it. Step 4: Verify the Installation
A: No. Device driver installation requires writing to C:\Windows\System32\drivers , which is protected. Contact your IT department for temporary admin credentials. xinje plc usb driver install
The default path is usually: C:\Program Files (x86)\Xinje\XDPro\Driver or C:\Program Files (x86)\XDPPro\USB_Driver .
Step-by-Step Guide: Installing the Xinje PLC USB Driver (No More “Device Not Recognized”) Xinje does not distribute the USB driver as
Typically a standard USB-A to USB-B cable or a proprietary Xinje programming cable depending on your specific PLC series (XC, XD, or XL).
After installation, you need to verify the driver is recognized by Windows and then configure XDPPro to connect. Windows will scan the folder, locate the driver
Many “failed installations” are actually cable failures. XINJE PLCs are sensitive to cable quality.
