Rated between 0.9 kW and 1.1 kW depending on production year.
The Strands S68 is a heavy-duty geared head drilling machine. Unlike belt-driven models, its all-gear drive ensures maximum torque transmission without slippage, making it ideal for heavy drilling, reaming, and tapping in industrial machine shops. Core Technical Data
Often carries digitized PDFs for Swedish industrial equipment. Lathes.co.uk Strands S68 Drill Press Manual
Unlike modern plastic-and-LED drill presses, the S68 is a cast-iron mechanical marvel. It relies on belt-driven speed changes, depth stop cams, and a rack-and-pinion feed mechanism. Without an original manual, simple tasks like changing the spindle speed or adjusting table alignment can become guessing games. The manual provides:
Loosen the column clamping levers. Use the mechanical hand crank to raise or lower the table via the rack-and-pinion system. Always lock the clamping levers tightly before drilling. Rated between 0
Proper maintenance ensures the long-term accuracy of the Swedish-engineered gears.
: Align the levers into their designated slots for the target range. If a lever resists, rotate the spindle by hand to align the internal gear teeth. Core Technical Data Often carries digitized PDFs for
Proper lubrication is the single most important factor in the longevity of any machine tool. According to a user who has access to the manual, the lubrication schedule is quite specific:
Use a high-quality, non-detergent industrial gear oil or a heavy machine oil (ISO VG 68 or Mobil DTE Heavy/Medium). Do not use modern automotive gear oils containing EP (Extreme Pressure) additives, as they can corrode internal bronze bushings.
Check that all three phases of your 3-phase power supply are active. Verify gear levers are fully engaged. Column clamp is loose or worn.
The Strands S68 has a high center of gravity, weighing up to 200 kg. Ensure the floor is rated for industrial machinery and level.