To connect your radio to your PC, you cannot use a standard USB cable. You need:
: A dedicated HYT 2-pin programming cable (such as the PC26 or a specialized USB-to-serial cable). Software : The HT700E setup package. 2. Install Drivers and Software
This is the most common issue. First, check that the radio is turned on and the battery has adequate charge. Next, verify that the programming cable is firmly seated into the accessory port. Finally, double-check that you have selected the correct COM Port in the software. hyt tc700 programming software 2021
You can find software packages (such as version 3.23 or the PCS700 suite) on dedicated communication hubs like RadioScanner or through authorized equipment dealers like 49er Communications . Step-by-Step Programming Process
: If the software says "This programming software cannot read/write the host version," you may need a newer revision of the CPS to match your radio's firmware. To connect your radio to your PC, you
The 2021 version of the CPS software HT700E Programming Software . 3. Installation and Setup Guide Follow these steps to install the software and drivers: Download the Software: Obtain the HT700E zip file.
Once your edits are finished, click > Save As to keep a backup copy on your PC. Click the Write icon (or go to Program > Write to Radio ). Next, verify that the programming cable is firmly
What is your computer's (Windows 10, 11, or older)?
To program a TC-700 in 2021 and beyond, specific hardware and software conditions must be met: Operating Systems