Pro Tip: If you are replacing your PS4 hard drive, you will need the full 1GB installation file, not the small update patch!
Complete Guide: PS4 9.00 Firmware Download and Install (Jailbreak Ready)
The PS4 9.00 firmware update, also known as the "Befroze" update, focuses on improving system performance, stability, and security. Some of the key changes include: ps4 900 firmware download install
Option B: The Full Recovery/Reinstallation File (Approx. 1 GB)
If you own a PlayStation 4 and have recently been greeted by a stark white screen with a dreaded error code—specifically (often shorted to the "900" error)—you are likely in a panic. This error usually appears after a failed system software update, a corrupted hard drive, or a sudden power outage during an install. Pro Tip: If you are replacing your PS4
If your console is acting unstable or you are installing a new hard drive, use Safe Mode: Turn off the PS4 completely. Plug the USB drive into the console.
A standard USB drive formatted to FAT32 or exFAT with at least 1 GB of free space. 1 GB) If you own a PlayStation 4
Disclaimer: Jailbreaking your console may violate Sony's Terms of Service and can void your warranty. Perform these actions at your own risk.
Your console must currently be on firmware 9.00 or lower . You cannot downgrade a console on a higher firmware (like 10.00+) to 9.00.
Hold the button until you hear : one when you initially press it, and a second beep approximately seven seconds later. Release the button after the second beep.
This process will wipe all data on your PS4. Your saved game data and captures will be lost unless you previously backed them up to PlayStation Plus cloud storage or a USB drive.