Easycap-sm-usb-007-windows-10-x64-drivers -

You will need a stable, pre-installed driver package. While the original SMI drivers are a good starting point, many users find success with archived "UTV007" or "SMI" drivers found on community tech forums. Ensure the package explicitly states "64-bit" or "x64" .

This usually happens because of a format mismatch. The driver might be expecting a PAL signal, but you are feeding it an NTSC tape (or vice versa). Open your capture software (like OBS), go to the properties of your video source, and adjust the Video Standard/Format from PAL to NTSC or NTSC to PAL. Conclusion

Use OBS Studio and select "SMI Grabber Device" as the Video Capture Device.

: Provides signed drivers specifically for the SM-USB 007 on Windows 10 . 3. Installation Steps easycap-sm-usb-007-windows-10-x64-drivers

: If Windows warns about an unsigned driver, choose "Install this driver software anyway" (Note: You may need to temporarily disable Driver Signature Enforcement if the installation fails).

Because the SM-USB-007 driver uses older architecture, Windows 10 may not install it automatically when you click on an .exe file. You will need to install it manually through the Device Manager.

EasyCap SM-USB-007 is a popular, low-cost analog video capture card that often requires manual driver installation on Windows 10 x64 because it isn't automatically recognized by modern systems. Core Driver Information The most reliable driver for this specific hardware ID ( USB\VID_1C88&PID_0007 You will need a stable, pre-installed driver package

If you prefer not to use GitHub, other community-driven archives offer similar packages. For example, a driver available on Softpedia is version 1.0.8.26, also signed by Somagic, and is designed for Windows 7 64-bit but is often compatible with Windows 10. Another source is a blog post from 8BitMammoth that hosts the driver on MediaFire.

Look for an unrecognized or yellow-flagged device (it might be listed as "Unknown Device", "SM-USB 007", or "usbtv007"). Right-click the device and select .

The you are trying to record (VCR, Camcorder, gaming console) Any error codes you are currently seeing on your screen Share public link This usually happens because of a format mismatch

Point the installer to the folder containing your downloaded x64 drivers. Step 4: Software Configuration

Once finished, your device should now be recognized under as the SMI Grabber Device . Step 4: Choose Your Capture Software

This is the most common error on Windows 10 x64. The old drivers are not signed by a trusted authority.

The original EasyCAP drivers were released for Windows XP and Vista (32-bit). These drivers: