V2000-c Rfid Access Control User Manual -

Sets the authentication method to require either a valid card OR a valid PIN code for entry.

Check your relay wiring. Ensure Fail-Safe locks use the NC wire and Fail-Secure locks use the NO wire.

Connect to positive lock terminal for Fail-Safe locks (Maglocks) COM (Common)

Are you using an or a simple 12V adapter? V2000-c Rfid Access Control User Manual

By following this manual, you should be able to successfully install, configure, and operate your V2000-C RFID Access Control system. If you encounter issues not covered here, please consult your vendor or the original manufacturer's documentation.

: Relay Normally Closed (NC) – Connects to Fail-Safe locks (Magnetic Locks) YELLOW : Open Button (PUSH) – Connects to the exit button

An anti-tamper switch is located on the circuit board. When the back plate is securely attached, the switch is depressed and silent. If the device is forcibly removed from the wall, the switch will pop out and the unit will emit a continuous buzzing alarm. Sets the authentication method to require either a

⚠️ Do not apply AC mains directly to the relay terminals.

Operation error, invalid PIN/Card, or programming command rejected. 4. Master Programming Guide

user wants a long article for the keyword "V2000-c Rfid Access Control User Manual". This appears to be a detailed user manual for a specific RFID access control model. To write a comprehensive article, I need to gather detailed information about this product. My search strategy involves several parallel searches targeting different aspects: general product information, user manuals, programming guides, wiring instructions, technical specifications, troubleshooting, and any related FCC or installation guides. I will also search for "V2000-C" to catch any alternative spellings. search results show several potential sources. The results include a Chinese document from docVIP (result 0), a configuration guide from Axxonsoft (result 1), a product page from paytakht-elec.com (result 2), an access control page from Vutlan (result 3), and a user guide for Avision V2000 (result 4). The Chinese document at result 0 appears to be a manual. The result from paytakht-elec.com might have specifications. The Vutlan page might have general access control information. The Avision V2000 user guide is likely for a scanner, not relevant. The results for "V2000-c" access control manual (result 1) show a document from wenku.baidu.com (result 1) and a manual from max.book118.com (result 3) and renrendoc.com (result 4). The search for V2000-c RFID programming instructions (result 0) shows a page from docs.axxonsoft.com. The search for V2000-c access control wiring diagram shows results for HID VertX V2000 installation guides (results 0, 1, 2). The search for V2000-c RFID card reader specifications shows a product page from goldbridgesz.com (result 0) and a manual from manualslib.com (result 2). The search for "V2000-c" troubleshooting shows results for Honeywell V2000 (result 0) and ASL INTERCOM V2000 (result 4), which may not be relevant. The search for "V2000-c" RFID access control FCC shows a page about FCC certification (result 0) and an RFID certification page (result 1). The search for V2000-C RFID access control shows a product page from goldbridgesz.com (result 0), a product listing from rfidworld.com.cn (result 1), a blog post (result 2), and a page from szedun.com (result 3). I will open the most promising results: result 0 from the first search, results 0, 1, 3, 4 from the second search, result 0 from the fourth search, result 2 from the fourth search, result 0 from the seventh search, result 1 from the seventh search, result 2 from the seventh search, and result 3 from the seventh search. search results provide a good amount of information. I have found several manuals and product pages that detail initialization, programming, specifications, and other aspects. I will use these to structure a comprehensive user manual. The article will be structured as follows: an introduction, product overview and specifications, hardware installation, initialization, wiring and jumper settings, programming using the keypad, adding and deleting users, setting access modes, additional features, troubleshooting, and technical support. I will cite the sources appropriately. V2000-C RFID Access Control: Comprehensive User Manual Connect to positive lock terminal for Fail-Safe locks

The manual emphasizes the following:

Proper installation ensures device longevity and prevents electrical shorts that could damage the access control system. Mounting the Device