You cannot "download" a filled EN 10204 for your material from the internet. Each certificate is unique to a production batch. However, you can download to understand the format.
The modern standard, which superseded the 1991 version, identifies four primary document levels: Go to product viewer dialog for this item.
Both the manufacturer’s authorized inspection representative and an independent third-party inspector.
If the certificate lacks essential tests (like impact tests) required by the material grade, it is incomplete. Summary Table Test Results Non-specific Actual (batch) Actual (batch) Validator Manufacturer Manufacturer (Internal) Third-Party Inspector Traceability Common Use General Steel Critical Structural Oil & Gas/Offshore Conclusion en 10204 pdf hot
EN 10204 was last updated in 2004, but a new revision (EN 10204:2023) is rolling out. Check that your certificate references the correct year.
Disclaimer: This report is for educational and informational purposes. For contractual or legal decisions, please refer to the official purchase document of the EN 10204 standard from your national standards body (e.g., DIN, BSI, AFNOR).
The standard defines four main levels of certification, categorized by whether the inspection is non-specific (based on general production) or (tests performed on the actual products being delivered). www.sanyosteel.com You cannot "download" a filled EN 10204 for
The unique identifier for the production batch.
A statement validating that the delivered products comply with the order. No test results are included.
This is the most commonly requested certificate. It states that the products comply with the order and provides the actual test results from the exact batch (heat) of metal supplied . This ensures full traceability of the chemical composition and mechanical properties. 4. Type 3.2: Inspection Certificate 3.2 Inspection type: Specific inspection The modern standard, which superseded the 1991 version,
Ensure the certificate has the proper stamps, signatures, and is issued by an accredited manufacturer. For Type 3.2 certificates, look for the signature of the independent third-party auditor.
A certificate issued by the manufacturer's authorized inspection representative, independent of the manufacturing department. It provides specific inspection results for the actual batch being delivered.
Always cross-reference the heat number on the EN 10204 PDF with the heat number physically stamped or etched onto the metal component.
EN 10204 is a European standard that specifies the different types of inspection documents supplied to the purchaser for the delivery of metallic and non-metallic products. It applies to steel plates, pipes, valves, forgings, and other critical industrial components.
EN 10204 specifies different types of inspection documents supplied to a purchaser to prove that the delivered material meets the technical requirements of the order. It ensures that every batch of steel can be traced back to its original "heat" or melt, which is critical for safety-sensitive applications like pressure vessels and offshore structures. The Four Types of EN 10204 Certificates