Skip to content
  • There are no suggestions because the search field is empty.
  1. Support Center
  2. Lenel Lnl-3300-m5 Installation Manual UPD
  3. Lenel Lnl-3300-m5 Installation Manual UPD

Lenel Lnl-3300-m5 Installation Manual Upd Verified Site

Enter the default credentials: admin , Password: password . Configuring Web Settings

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Plug the field wiring back into the new module. It is compatible with 12 VDC power, cabinet tamper, and AC power fail inputs from legacy power boards. Network Setup : Connect via the onboard 10/100 MB Ethernet port. Initial Configuration & IP Setup To access the web configuration page for initial setup: Default IP Address 192.168.0.251 Computer Configuration : Set your laptop to a static IP in the same range (e.g., 192.168.0.250 ), avoiding DIP Switch Settings Switch 1 OFF, 2 ON, 3 OFF, 4 OFF for initial web configuration access. To use default credentials (Username: , Password: DIP Switch 1 ON Lenel Lnl-3300-m5 Installation Manual UPD

Open a web browser on a laptop configured to the same subnet and enter the controller's IP address.

The four‑position DIP switch (S1) configures the operating mode of the controller. Settings are read at power‑up or, in some cases, “on the fly.” Enter the default credentials: admin , Password: password

Updating the firmware ensures compatibility with the latest versions of Lenel OnGuard software and patches critical security vulnerabilities. Initial IP Configuration via Web Interface

Connect your laptop to the same subnet, open a web browser, and navigate to the controller's IP address. If you share with third parties, their policies apply

The LNL-3300-M5 drops directly onto the existing standoffs of a CASI Micro/5 enclosure. Ensure the power supply is completely disconnected before making any terminal connections.

Standard installations utilize the legacy enclosure’s battery backup to ensure functionality during a grid power failure. Initial Configuration and Network Setup

Note: The manual is approximately 48 pages long and includes 12 wiring diagrams not reproduced here due to copyright.

To ensure optimal security and performance, regularly check for firmware updates through the Lenel technical support portal. Periodic physical inspections of the wiring and power supply are also recommended to prevent environmental degradation of the hardware.