- Company
- About Us
- Contact Us
- Shopping Info
- View Cart
- Account / Order Status
- Product Index
- Category Index
- Helpful Info
- Shipping & Returns
- Privacy Policy
- Terms & Conditions
- Questions?
- Contact Us Immediately
- Mon-Fri 7am-10pm CST
Shut down immediately. Verify phase rotation. If the wiring is correct, internal bearings or scrolls may be failing, requiring a professional overhaul. Summary for Fleet Managers and Operators
Without the official manual, here is a table of common issues and their solutions, compiled from official Sumitomo technical manuals for similar models.
The F-50 is engineered for continuous, long-term operation. It functions by compressing low-pressure helium returned from the cold head and discharging it at a higher pressure. A key feature of the F-50 is its integrated oil-lubrication system. Since cryocoolers require ultra-pure helium, the compressor utilizes a sophisticated multi-stage filtration and oil separation process. This ensures that no oil vapor reaches the cold head, which would otherwise freeze and cause a system failure. Installation and Safety sumitomo f50 compressor manual
Roughly 450mm x 480mm x 585mm (Width x Depth x Height). Gas and Cooling Requirements
For any issues not covered in this guide, it is always best to consult a qualified service technician or contact Sumitomo Heavy Industries (SHI) directly. Shut down immediately
Maintaining the compressor is vital to prevent helium leaks and ensure the longevity of the cold head.
If the static pressure drops below the recommended range, helium must be added following strict purity protocols. Summary for Fleet Managers and Operators Without the
Connect the charging line to the compressor’s charge valve. Slowly crack the valve open and monitor the pressure gauge.
Position the compressor on a flat, level surface capable of supporting its weight. Ensure at least 30 cm (12 inches) of clearance on all sides for adequate ventilation and maintenance access. The ambient room temperature must remain between 10°C and 35°C. 2. Cooling Water Connections
Proper installation is critical to prevent oil contamination and mechanical stress. The manual emphasizes several pre-operation checklists. Location and Environment
