Grid Code Password Victron Install Better Jun 2026

| User Role | Typical Password | Notes | |-----------|----------------|-------| | (default) | 00000000 (eight zeros) | Most common default for new units | | System Owner (user-set) | Variable | Set during first setup via VRM or GX | | Advanced / OEM | 12345678 | Some older firmware versions | | Grid code override | ZEG123 | Only for specific utility pre-approvals (rare) |

Immediately after installation, change the grid code password to a secure, documented number (e.g., your company ID) to prevent future tampering by other trades on site.

Have you encountered a locked grid code on a Victron install? Share your region and utility requirements below—solutions are always code-specific, never universal. grid code password victron install

To avoid grid code password issues entirely:

Do not confuse the grid code password with the standard Bluetooth pairing PIN for VictronConnect. The Bluetooth password (often found in your inverter's manual or labeled on the device) allows you to connect to the unit wirelessly—it has nothing to do with grid code protection. The grid code password operates at a deeper firmware level within VEConfigure or VictronConnect's advanced settings. | User Role | Typical Password | Notes

The initial selection of the grid code is designed to be straightforward and does require a password.

: Selecting a grid code will often force you to choose a Loss of Mains detection method (Type B or Type Co-axial). Ensure you check your local utility requirements for the correct setting. To avoid grid code password issues entirely: Do

Because grid settings affect safety and legal compliance, you should obtain this password through official channels: