Qidi X-pro Manual (2025)

using the provided leveling paper to ensure a consistent gap between the nozzle and the bed. Loading Filament: Place filament on the external holders. Heat the extruders via the "Tools" menu.

Carefully cut the zip ties securing the X-axis and Y-axis rods. Remove the foam blocks from inside the printing chamber.

The QIDI X-Pro utilizes a full-color touchscreen. The manual provides a diagram of the icons, but here is how you will actually use them:

Are you encountering any specific on your touchscreen? qidi x-pro manual

At each point, slide the paper back and forth beneath the nozzles.

The X-Pro utilizes a removable magnetic build plate. Clean the surface thoroughly with 90%+ Isopropyl Alcohol (IPA) to remove finger oils. For stubborn materials like ABS, apply a thin layer of glue stick to the bed before printing.

Select your extruder configuration (Single Left, Single Right, or Dual Extrusion). Optimal Slice Settings for Common Materials PLA Filament ABS Filament 190°C – 210°C 220°C – 240°C Bed Temperature 50°C – 60°C 90°C – 110°C Print Speed 50 – 60 mm/s 40 – 50 mm/s Cooling Fan Enclosure Open Top/Sides Fully Closed 6. Maintenance and Care using the provided leveling paper to ensure a

Ensure both nozzles are aligned at the same height to prevent the "idle" nozzle from dragging on the print. Software & Connectivity Qidi 3D Printer Setup Help Needed

Routine maintenance keeps your X-Pro running smoothly and avoids catastrophic component failures. Regular Maintenance Schedule

Secure the assembly from underneath using the provided hex screws. Carefully cut the zip ties securing the X-axis

Routine maintenance prevents print failures and extends the life of your hardware.

Wipe down the removable magnetic build plate with 90%+ Isopropyl Alcohol (IPA) before every print to remove finger oils.