A standard operational flow using MemTool 4.9 involves the following steps:
Memtool can simulate random access for Flash memory that is not byte-wise erasable by handling bank reads and erases efficiently.
Supports on-board debuggers (Wiggler) as well as external debuggers, such as the Infineon miniWiggler. infineon memtool 4.9
The –auto flag starts programming immediately.
Select the target sector or the entire memory, then initiate the function. Following the erasure, the Program function transfers the data from the buffer to the FLASH module. A standard operational flow using MemTool 4
Connect your target board to the PC via a supported interface (e.g., USB-to-UART or miniWiggler). Setup: Run the installation and launch the tool. Programming Workflow
: A common interface layer often required for tool-to-target communication. Hardware Interface : Supports connections via standard RS232 ports Debugging Hardware : For custom boards, users typically employ the Infineon miniWiggler to establish stable DAP or JTAG connections. Usage Limitations Select the target sector or the entire memory,
Watch the progress bar; the software will automatically execute a verification cycle if the option is checked.
Enter . This standalone debugger and programming interface is the gold standard for engineers who need raw access to memory, flash controllers, and peripherals without the overhead of a full Eclipse-based suite.
Comprehensive Guide to Infineon MemTool 4.9: Features, Usage, and Best Practices
To launch MEMTool 4.9 from your IDE after a build, use: