Din En 60352-2 Pdf -

It outlines mechanical and electrical thresholds that prevent common crimp failures, such as wire pull-out or high contact resistance.

DIN EN 60352-2 is the German edition of the European standard EN 60352-2, which is itself identical to the international standard IEC 60352-2. The full title is (in German: Lötfreie Verbindungen - Teil 2: Crimpverbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise ).

: Conductors must be stripped correctly and inserted to a specific depth—usually the pin insertion depth plus 1mm or 2mm depending on the cross-section—to ensure a full electrical bond. Phoenix Contact 3. Essential Testing and Quality Criteria

To help provide the right data or context, let me know if you need info on , the latest standard revision year , or micrographic inspection criteria . Share public link din en 60352-2 pdf

Complete compression of all wire strands into a solid, honeycomb-like structure.

), and damp heat aging. Post-exposure contact resistance measurements cannot exceed the baseline values by margins defined within the document.

DIN EN 60352-2 standard, titled "Solderless connections - Part 2: Crimped connections," establishes the general requirements and test methods for solderless crimped connections used in electrical and electronic equipment. It is the German and European adoption of the international IEC 60352-2 iTeh Standards Scope and Applicability This standard applies to crimped connections made with: iTeh Standards Stranded wires : Cross-sectional areas from 0.05 mm² to 10 mm² Solid wires : Diameters from 0.25 mm to 3.6 mm : It specifically does not apply to the crimping of coaxial cables. IEC Webstore Key Requirements and Topics : Conductors must be stripped correctly and inserted

Engineers, quality managers, and production technicians use this standard to validate crimping tools, processes, and finished assemblies. What is DIN EN 60352-2?

Zero void spaces or gaps between the strands or the barrel wall. Symmetric deformation of the terminal "wings" or barrel. Critical Testing Requirements

To achieve certification under DIN EN 60352-2, crimp connections must undergo rigorous testing. These tests are divided into mechanical and electrical categories. Mechanical Pull-Out Force Share public link Complete compression of all wire

DIN EN 60352-2 provides two main test schedules, which are outlined in the standard's PDF documentation:

cross-section) and solid wires (0.25 mm to 3.6 mm diameter). :

Most users jump to the force tables. The appendix contains flow charts for troubleshooting bad crimps (e.g., "Is the crimp height too low? -> Check wire stranding crushing")

: Requirements for uninsulated or pre-insulated barrels, with a focus on tensile strength rather than older Vickers hardness metrics.

The standard describes what a "good" crimp looks like: