: Open the support brackets on the metal mattress spring. Attach the spring to the corner posts using 1" screws and barrel nuts.
Attach the mattress support brackets (or latch brackets, depending on your model) onto the inside of the headboard.
If the crib wobbles, ensure you used the lock washers (the split rings) alongside the flat washers. These prevent bolts from vibrating loose over time.
Insert the from the outside of the side panel into the headboard.
Insert the bolts through the mattress support brackets and tighten them into the headboard/footboard. : Open the support brackets on the metal mattress spring
. Use the tabs on the spring to mount it to the selected height position on the legs. Secure each corner with 3/4" bolts and tighten them with the Allen wrench. Final Security Check
The front rail completes the main structural box of the crib.
Completely disassemble the entire crib structure until the large back headboard and front footboard are isolated.
Mandatory as soon as your baby can pull themselves up to a standing position. This prevents accidental falls over the top rail edge. If the crib wobbles, ensure you used the
Open all boxes and lay out every piece. Side Panels (x2) Front Panel Back Panel (Headboard) Mattress Support Frame
Move to the lowest position once the child can sit up or pull to a standing position to prevent falls. Connect Headboard and Footboard:
For newborns, use the highest setting. As soon as your baby can sit up, you must lower the mattress to the lowest position for safety.
Master the Babi Italia Parkland Convertible Crib Assembly Instructions Better Insert the bolts through the mattress support brackets
If you have lost your instructions, the best source is to search LaJobi (manufacturer) support for the specific to get the official diagrams.
Here is where most people mess up. You must insert the long bolts through the right side panel, through the rails, and then——you insert the barrel nuts into the pre-drilled holes on the inside of the rails.
Now step back, admire your work, and get that nursery ready. You’ve just built a crib that will last for a decade. And you did it better than the manual ever told you.
: Tighten all bolts securely. Avoid using power drills, as they can strip the wood or over-tighten the hardware. Converting to a Toddler Bed