Onur Plast
Məhsul Çeşidləri
Əlaqə Məlumatları
Bakı Şəhəri
- Bakı-Sumqayıt şosesi 17-ci km. (DYP Saray postunun yanı)
- İş vaxtı: 09:00 - 18:00
Overrides physical write-protection errors by completely wiping the controller's parameter RAM.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
during this process. The slot will turn bright Green (OK) upon successful completion, or Red (CT-Error / Flash Error) if it fails.
: A configuration file that tells the software how to communicate with the specific NAND flash memory on your drive. phison mpall v3700e patched
: Flashing newer .bin files to improve compatibility or performance. Key Components Required
: The main application interface.
Scope and assumptions
Before you can use MPALL, you must confirm your drive has a compatible Phison controller. Use a tool like (also known as "Chip Genius" or "Chip Easy") to identify the USB controller chip. This program will show you the chip's manufacturer, model (e.g., Phison PS2251-03), and other vital information.
This specific version is highly recommended for the following Phison controller models: (USB 3.0) PS2251-07 PS2251-67 PS2251-68 Key Features and Setup
Before attempting to use v3.70.0E, you must verify your drive's internal hardware. This specific version of MPALL is highly optimized for legacy and widely deployed Phison controller generations, specifically: PS2251-60 PS2251-61 PS2251-67 PS2251-03 (USB 3.0 initial generation) If you share with third parties, their policies apply
. If the drive is not detected, you may need to enter "Test Mode" by manually shorting specific pins on the NAND chip. Configuration and choose Basic Setting New Configuration Select your controller model from the dropdown menu in MPParamEdit_F1.exe Specify the paths for your ISP Burner file Firmware file : Save the settings and click . Wait for the status indicator to turn green and display Common Errors and Safety Warnings Brick Risk
Standard versions of MPALL often have restrictions or lack the necessary
Patched versions circulate on forums like , MyDigitalLife , or FlashBoot.ru — often labeled as “MPALL v3.700E patched by vitor” or “no‑check version”. These are unsigned tools and may trigger antivirus warnings (due to low‑level USB access, not necessarily malware — but caution is advised). during this process
A 64GB drive suddenly shows up as 8MB, 0MB, or "Unknown Device."
Run the diagnostic tool and look for the (e.g., Phison PS2251-67 ) and the Flash ID Code (FID) .
Overrides physical write-protection errors by completely wiping the controller's parameter RAM.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
during this process. The slot will turn bright Green (OK) upon successful completion, or Red (CT-Error / Flash Error) if it fails.
: A configuration file that tells the software how to communicate with the specific NAND flash memory on your drive.
: Flashing newer .bin files to improve compatibility or performance. Key Components Required
: The main application interface.
Scope and assumptions
Before you can use MPALL, you must confirm your drive has a compatible Phison controller. Use a tool like (also known as "Chip Genius" or "Chip Easy") to identify the USB controller chip. This program will show you the chip's manufacturer, model (e.g., Phison PS2251-03), and other vital information.
This specific version is highly recommended for the following Phison controller models: (USB 3.0) PS2251-07 PS2251-67 PS2251-68 Key Features and Setup
Before attempting to use v3.70.0E, you must verify your drive's internal hardware. This specific version of MPALL is highly optimized for legacy and widely deployed Phison controller generations, specifically: PS2251-60 PS2251-61 PS2251-67 PS2251-03 (USB 3.0 initial generation)
. If the drive is not detected, you may need to enter "Test Mode" by manually shorting specific pins on the NAND chip. Configuration and choose Basic Setting New Configuration Select your controller model from the dropdown menu in MPParamEdit_F1.exe Specify the paths for your ISP Burner file Firmware file : Save the settings and click . Wait for the status indicator to turn green and display Common Errors and Safety Warnings Brick Risk
Standard versions of MPALL often have restrictions or lack the necessary
Patched versions circulate on forums like , MyDigitalLife , or FlashBoot.ru — often labeled as “MPALL v3.700E patched by vitor” or “no‑check version”. These are unsigned tools and may trigger antivirus warnings (due to low‑level USB access, not necessarily malware — but caution is advised).
A 64GB drive suddenly shows up as 8MB, 0MB, or "Unknown Device."
Run the diagnostic tool and look for the (e.g., Phison PS2251-67 ) and the Flash ID Code (FID) .
