During setup, select the specific Gravotech machine models connected to your network or computer.
: Use the Bird's Eye View preview to confirm the engraving path before hitting "Run". 4. Saving and Finalizing
| Problem | Likely Solution | |---------|----------------| | Machine not detected | Check USB cable, restart machine, reinstall USB driver from Gravostyle DVD. | | Engraving offset or skewed | Re-home the machine; check belts/screws; calibrate in Tools > Machine calibration . | | Wrong engraving depth | Clean lens (laser); check Z-axis zero position (mechanical). | | Software crashes | Run as Admin; disable antivirus for Gravostyle folder; update graphics driver. | | Font doesn't engrave | Convert text to curves ( Ctrl + Q ) if using complex TrueType fonts. |
Expressed as a percentage. High speeds are used for marking; low speeds are used for vector cutting. gravostyle 8 manual
Define the (typically the upper-left corner or center).
that you can customize by right-clicking to add your most-used commands, such as "New Composition" or "Zoom Material". Material Mode: Define your plate size, margins, and orientation here. Text Mode: Switch between "Automatic" (fixed position) and "Manual Text"
Connect your engraving machine via USB, Ethernet, or Serial cable. During setup, select the specific Gravotech machine models
The manual breaks down the engraving process into straightforward steps:
, photo engraving (Photostyle), and 2D/3D recessing for logos. Machine Integration Point & Shoot
Enable the (if supported by your machine) to trace the boundary box onto your blank. Saving and Finalizing | Problem | Likely Solution
: Ensure your Windows Region and Language settings for Unicode programs are set to English. as an Administrator from the Gravostyle USB drive. Machine Connection Connect the machine via USB or network.
: 8 GB minimum; 16 GB or more recommended for large vector layouts.
Gravostyle 8 is professional engraving software developed by . It controls a wide range of engraving machines (laser, mechanical, rotary) for creating signs, plaques, personalization, industrial marking, and more. This manual covers the core workflows: design, layout, engraving parameters, and machine output.