If you'd like me to focus on a specific feature—like setting up a new label format, connecting the scale to a PC, or troubleshooting a particular error code—just ask! Share public link
Press the or REGS/PROG key (depending on keyboard layout variation).
Press the or [MODE] key twice (depending on keyboard firmware version).
If you need help with , configuring network settings (IP addresses) , or designing custom label formats for your DIGI SM-500 scale, please tell me what you need so I can provide the exact steps. Share public link digi sm500 scale user manual
Remove everything from the platter and press the TARE key again to reset. 7. Troubleshooting Common Error Codes Error Code / Symptom Probable Cause Corrective Action OF or OFL Scale Overflow / Weight too high Remove excess weight from the platter immediately. UF or UFL Scale Underflow / Platter missing
If you are connecting it to a system.
ON → Zero → Load → Read To tare: Container → TARE → Add sample To calibrate (external): Hold CAL → place 500g → wait PASS To count parts: PCS → set sample size → add samples → PCS again To clean: Dry cloth only – no liquids If you'd like me to focus on a
A clears all PLU data and restores factory settings. Use only when absolutely necessary.
: Assembly involves mounting the display pole and ensuring the scale is level via the adjustable feet for accurate measurement.
If you know the weight of a tray (e.g., 15 grams), type 15 on the keypad and press the TARE key before placing the item down. If you need help with , configuring network
It worked. He felt a ridiculous surge of power. He was measuring the invisible. He measured a single eyelash (). He measured the ink from a ballpoint pen dot ( 0.00 g —too small). He tried to measure the weight of a thought by thinking “heavy” while touching the glass. The display stayed at zero. Disappointed, he assumed the scale was lying.
The SM500 uses a wide‑ranging power supply: 100–240 V, 50–60 Hz. It automatically adapts to your local voltage. Simply plug in the power cord, press the switch (usually on the back or side), and the display will illuminate.