Cobra 3195 Alarm Manual ((exclusive)) Full 〈5000+ Quick〉

To disable specific sensors (e.g., the tilt sensor if parked on a slope or volumetric sensors if pets are inside), use the smaller button on the remote: pressing it once disables one sensor, twice disables another, usually within 40 seconds of arming.

Press the on your Cobra remote control handset once. The hazard lights will flash twice.

Cobra 3195 Alarm Manual: Full Guide to Installation, Programming, and Troubleshooting Cobra 3195

Are you currently dealing with a specific (e.g., random triggers)?

: Ultrasonic volumetric sensor (interior movement). 4 Flashes : Attempted hotwire (ignition key ON).

Press and hold on the new remote control fob until the small LED on the fob stops flashing and turns off (approx. 7–10 seconds), then release them. The remote LED will turn on steadily.

Permanent +12V Battery Feed. Connect via a 15A inline fuse.

Triggers if doors, bonnet, or boot are opened while armed.

Turn the ignition OFF . Wait for the LED to flash 2 times , then immediately turn the ignition ON .

If you are leaving a pet or passenger inside the vehicle, you can disable the internal motion sensors while keeping the doors protected. Turn the vehicle ignition .

If your remote is lost or the battery is dead, you can disarm the system using your unique 4-digit PIN: Midlands Lotus Owners Club Turn the ignition ON and OFF 3 times within 5 seconds.

If you need help adjusting specific features on your Cobra 3195, tell me: What is your vehicle?

The Cobra 3195 is a complex system that requires splicing into your vehicle's core electrical systems. All connections should be properly soldered to ensure reliability and security.