With v1052, this process has been streamlined. Reports suggest the error-handling algorithms are more robust. Where v1.0.4.x might hang on a bad sector, v1052 will skip, log, and continue, resulting in a usable drive with slightly reduced capacity rather than a failed process.
The interface will open entirely in Chinese by default. Locate the toggle block on the right panel and check the box for English to fix the UI. Step 3: Configure Scan Parameters
Back up current calibration and register map.
I can provide the specific configuration edits needed to bypass a failed repair run. Share public link
The program window splits into physical slot indicators. Once your drive registers inside a grid slot, you must select the appropriate operations method: FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
A modern, highly efficient controller optimized to manage cheap, low-grade, or downgraded 3D TLC/QLC NAND flash.
: Scans for bad blocks on the NAND memory and identifies the actual usable storage.
Insert your non-working USB drive into a direct motherboard USB port (avoid external hubs). Run the diagnostic program and locate the hardware profile.
to verify your drive actually uses a FirstChip FC1178 or FC1179 controller. Tool Launch FCMpTools.exe
: If the flash drive constantly fails at 99%, slightly increase the ECC allowance strength to help the controller bypass weak blocks.
When prompted for a password, and click OK. If an older version demands a code, use the standard default string 320 .
