Adjust the mechanical limit cams at the top and bottom limits of the rail. These tabs trip the microswitches inside the carriage, telling the lift exactly where to slow down and stop safely at both landings. Section 7: Testing, Safety Checks, and Maintenance
Drive the lift to the absolute top and bottom of the rail. The lift should decelerate smoothly and come to a full stop automatically via the micro-switches striking the final ramp plates. Maintenance and Troubleshooting Reference Potential Cause Resolution Lift will not move, no lights Main key switch off / Discharged battery Turn key to 'ON'; Check transformer plug Constant beeping from unit Lift stopped off a charging station Drive lift to absolute top or bottom terminal Lift moves intermittently Dust on internal copper charging strips Clean the interior rail channels with a dry cloth thyssenkrupp levant stair lift installation manual top
Are you working with a or a used / reconditioned unit? Adjust the mechanical limit cams at the top
: At the top of the stairs, the rail is capped, and final safety sensors are tested. These sensors are vital; they detect obstructions on the staircase and will stop the lift immediately to prevent accidents. Levant Stairlift User Manual | PDF | Chair - Scribd The lift should decelerate smoothly and come to
Ensure all bolts are tightened to specification. Why Professional Installation is Recommended
Before beginning the installation, ensure you have the following tools and have verified the site requirements: