: The selected stock firmware files are corrupted, incomplete, or carry a Binary Rollback Protection version lower than what is currently locked onto the device.
Odin versions are optimized for different eras of Samsung device architecture. Using an outdated version on a new phone—or a brand-new version on an older phone—can cause communication failures.
Many users make the mistake of manually ticking the box in Odin. Unless you are flashing an older device or attempting a very specific custom ROM setup, this is rarely necessary. Open Odin and load your firmware files (BL, AP, CP, CSC). Navigate to the Options tab. Ensure the Re-Partition box is unchecked . Click Start to flash the firmware as a standard upgrade. Method 2: Use a Clean PIT File
Click , accept the warning, and load your extracted .pit file. re-partition operation failed. odin
If you manually enabled "Re-Partition" in the Odin options tab, turn it off. Standard stock firmware updates do not require this setting unless you are changing the partition layout intentionally. Close Odin and disconnect your phone. Force-restart your phone back into . Open Odin again. Go to the Options tab and ensure Re-Partition is unchecked .
Download the correct multi-file (4-file or 5-file) stock firmware for your device. Extract the firmware files onto your computer. Locate the file starting with or HOME_CSC_ .
Sometimes, the error is a false positive or a temporary glitch. : The selected stock firmware files are corrupted,
Ensure the firmware matches your exact device model (e.g., SM-G998B vs. SM-G998U). They are not interchangeable.
Before jumping straight into troubleshooting, it is important to understand why this failure happens. The most common culprits include:
The "re-partition operation failed" error in Odin is a common issue that occurs when the software tries to reallocate the partition table on a Samsung device and fails . This often happens because the file is missing or the "Re-Partition" box is checked without the necessary files loaded. Here is how you can troubleshoot and fix this error: 1. Disable the Re-Partition Option Many users make the mistake of manually ticking
This error typically appears when Odin attempts to rewrite the partition structure of your phone's internal storage (often via a PIT file) and runs into a roadblock. This article explores why this happens, the risks involved, and—most importantly—a step-by-step approach to fixing your Samsung phone or tablet. Understanding the "Re-Partition Operation Failed" Error
If the phone cannot be forced into Download Mode (it loops on a Samsung logo or stays black), it is considered a "Hard Brick." Unlike a soft brick, this cannot be fixed at home with Odin. It requires a or EDL service (hardware repair tools) to rewrite the partitions manually.
Comprehensive Guide to Fixing the "Re-Partition Operation Failed" Error in Odin