Swing out the connector and snap the bicarbonate bag into place.
The machine performs a 2-minute internal leak test upon startup. Do not bypass this. If an alarm sounds, refer to Section 7 (Fluid System Errors).
Houses the peristaltic pump that safely circulates the patient's blood through the extracorporeal circuit.
Increase the blood pump speed gradually to the target prescription rate and press the "Start Treatment" key on the touchscreen. Critical Parameters to Monitor fresenius 6008 user manual
Activate the automatic drain function via the touchscreen. The machine will use air to evacuate residual fluid from the dialyzer and the 6008 CAREsystem cassette into the waste drain. Release the cassette door mechanism.
: An all-in-one disposable cassette with pre-connected bloodlines. This design eliminates several manual steps required in older models, such as connecting infusion lines or manual arterial disconnection.
Reposition the needle or patient. Reduce blood pump speed temporarily to assess access performance. Swing out the connector and snap the bicarbonate
Official documentation emphasizes rigorous hygiene and safety protocols to protect both staff and patients.
Regular replacement of the DIASAFE plus filters to guarantee the pyrogen-free purity of the dialysate and substitution fluid.
: Monitor parameters such as arterial pressure (–300 to +300 mmHg) and blood flow (30 to 600 mL/min). If an alarm sounds, refer to Section 7 (Fluid System Errors)
: The machine must be internally disinfected before every patient connection. Common programs include heat disinfection (typically 85°C) and chemical cleaning (e.g., using Citrosteril® or Puristeril®).
Check patient access for kinks; clear air bubbles; check dialyzer for clotting. Medium Priority Sound alerts; Treatment continues with restrictions.