20 Pro - How To Unbrick Infinix Gt

Install filter drivers. Run the utility and select "Install a device filter".

Navigate to your extracted Firmware folder and select the scatter file (e.g., MT6896_Android_scatter.txt or similar depending on the exact ROM package).

Install MediaTek USB VCOM drivers so your PC can communicate with the phone in "BROM" or "Preloader" mode.

Navigate to the extracted SP Flash Tool folder and run the SPFlashToolV6.exe file. How to Unbrick INFINIX GT 20 Pro

While holding the buttons, connect the phone to the PC via the USB cable.

Disclaimer: Flashing firmware carries risks. Proceed with caution. This guide is for educational purposes.

You must download the exact stock ROM for your specific INFINIX GT 20 Pro model (typically model number X6711). Installing firmware meant for a different variant will permanently damage the hardware. Ensure the firmware package contains a (a text file ending in .txt that maps the phone's partitions). 2. MediaTek (MTK) USB Drivers Install filter drivers

The firmware folder must contain these files:

A hard-bricked device often occurs after a failed custom ROM installation. The device may not vibrate or turn on, but when connected to a PC, it appears as MediaTek USB Port (COM#) in Device Manager. Flashing Tool : Professionals and advanced users often use the Carlcare_FlashTool

Before starting, it is crucial to diagnose the exact state of your : Install MediaTek USB VCOM drivers so your PC

Boot to recovery → factory reset. If that fails, proceed with SP Flash Tool in Download Only mode using stock firmware from INFINIX’s official update server or a trusted community source.

Install the downloaded MTK USB and VCOM drivers. Restart your computer normally. Step 2: Extract the Firmware and Tools

: Ensure your INFINIX GT 20 Pro has at least a 50% battery charge , as flashing software or performing a factory reset during a power loss can cause further damage.

Drop a comment below or share which method helped you! 🔄