Xycd60 — Manual

The (often branded as XY-CD63 or XY-CD63L) is an indispensable, budget-friendly digital battery management module. It works as a smart switch based on voltage thresholds, allowing users to define strict operating ranges for charging (IN mode) and discharging (OUT mode) systems. 1. Features and Specifications

The is a versatile 6V-60V DC battery controller designed to protect both batteries and loads by managing charge and discharge cycles.

The time allowed for charging or discharging (0-999 minutes).

Long press the SET button for approximately 5 seconds to save your values and return to the main interface. Working Modes

When the voltage rises above the Upper voltage (UP) , the relay switches on (load works). When the voltage falls below the Down voltage (dn) , the relay switches off (stops discharge) [as per Scribd User Manual]. 4. Parameter Settings Manual To configure the device, follow these steps: xycd60 manual

This article serves as a comprehensive manual, covering technical specifications, wiring instructions, parameter settings, and operational modes based on standard configurations. 1. Technical Specifications

Configuration is performed using the three front‑panel buttons. All parameters are stored in non‑volatile memory.

30A (Requires appropriate cooling for sustained high loads). Control Precision: 0.1V. Work Modes: Charging Mode (IN), Discharging Mode (OUT).

Below is a breakdown of the core functions and setup steps typically found in the XY-CD60 manual Core Operating Modes The (often branded as XY-CD63 or XY-CD63L) is

User Guide: XY-CD60 Battery Charge and Discharge Controller is a versatile digital battery control module designed to manage charging and discharging for batteries ranging from DC 6V to 60V

The unit features terminals for battery connection and charging/load connection.

The XY-CD60 manual (hosted on Scribd) notes its popularity in:

Clear LCD screen showing voltage, percentage, and time. Features and Specifications The is a versatile 6V-60V

if you tell me the type of battery (Li-ion, LifePO4, Lead-acid) and the voltage ( 12V12 cap V 24V24 cap V 48V48 cap V ) you are using.

The Xycd60 device comes with a range of innovative features and functions. Here are some of the key highlights:

Always connect the battery first to ensure the screen powers up and the module recognizes the voltage levels. 3. Operating Modes: Detailed Setup The module has two main modes: Charging and Discharging. A. Discharging Mode (U-2 / P-2)

: Long-press the DOWN button to toggle the screen's auto-off mode.