Ali-rs232-upgrade-tool-v1-2-0 ((top)) Downloader Direct

Select the correct (e.g., COM1 or COM2) from the dropdown menu.

: Set to "Upgrade" (unless you are backing up existing firmware, then choose "Dump"). Initiate Process : Click the button in the software.

: Primarily used for upgrading system software, flashing new firmware, or "unbricking" receivers that fail to boot. Connectivity ali-rs232-upgrade-tool-v1-2-0 downloader

: Click the Next button inside the downloader UI; the program will wait for a connection signal.

: Ensure both the PC and the receiver are powered off. Connect the serial cable to the RS232 port on the receiver and the COM port on your computer. Select the correct (e

Power on the receiver while the tool is waiting, allowing the tool to connect to the chipset.

: Launch Upgrade.exe . Select the correct COM Port (check Windows Device Manager) and set the Upgrade Type to "Allcode + Bootloader" for a full system refresh. : Primarily used for upgrading system software, flashing

: Launch the Ali RS232 Upgrade Tool V1.2.0.exe .

The tool will display a progress bar. until the process reaches 100% or displays "End".