operate the charger before reading these safety warnings:
The Bradex BX60 is a 12V, 4-amp manual lead-acid battery charger featuring an output ammeter to monitor charging progress. It is designed for simple, direct connection, requiring users to manually disconnect the unit once the needle settles at 0A to avoid overcharging. For further technical details and user reviews, visit Tayna Batteries . How to use Car Battery Charger
is designed strictly for . Do not use it for NiCad, Lithium, or dry-cell batteries, as this can cause them to burst.
is a reliable, straightforward tool to get you back on the road. Known for being an inexpensive yet durable option for occasional use, this manual charger is built to handle standard 12V lead-acid batteries.
Plug the charger's AC power cord into a grounded 220-240V wall outlet. Flip the main power switch to . bradex bx60 battery charger manual full
Toggles the unit between battery charging mode and engine jump-starting mode. Main Power Switch: Turns the AC input power ON or OFF.
Controls the charging speed. "MIN" is used for standard, slow charging. "MAX" is used for fast charging (boost mode).
Check wall outlet breaker. If unit is hot, let it cool for 15 minutes; press the thermal reset button. Short circuit in battery or reversed polarity connections.
Keep the charger dry. Do not expose to rain or snow. operate the charger before reading these safety warnings:
Double-insulated construction (no earthing required) with built-in safeguards against thermal overload, short circuits, and reverse polarity. Operational Guidelines
Before operating the unit, familiarize yourself with its electrical limits and capabilities: 220V–240V AC, 50/60 Hz Output Voltage: 12V / 24V DC (Selectable) Normal Charge Current: 30A Maximum Charge Current: 50A Boost/Start Current: 250A–300A (Peak) Compatible Battery Capacity: 20Ah–600Ah Battery Types: Lead-acid, AGM, GEL, and Wet cell 2. Important Safety Precautions
Follow these steps to safely charge a single battery or battery bank: Step 1: Battery Preparation
: Attach the red (+) crocodile clip to the positive terminal of the battery. How to use Car Battery Charger is designed strictly for
Plug the charger into a standard 230V AC wall outlet.
Have an assistant turn the vehicle ignition key for no longer than .
Buried beneath a stack of National Geographics from the 90s, he found it: the .
Built-in safeguards against short circuits, reverse polarity, and thermal overload. Tayna Batteries Operating Instructions Preparation:
Clean battery terminals. Re-clamp tightly to break through dirt or corrosion. Check internal fuses. Transformer overload or aging plates.