: Set the current hour (pay attention to AM/PM or 24h format). MIN : Set the current minutes. 3. Programming ON/OFF Schedules The timer can store up to 8 separate programs. Enter Programming : Press PROG . The screen will show "1 ON".
Note: Using the "WEEK" button allows you to select specific days, all 7 days, or combinations (e.g., weekdays only).
Hold down the CLOCK button and press the HOUR button until the current hour appears (ensure AM/PM is correct).
Cycles through the 20 available ON and OFF event settings.
: Use a pen or paperclip to press the small "Reset" (or "R" ) button to clear any factory settings or previous programs. Setting the Current Time & Day
: Cuts all downstream power entirely, ignoring the programming. Advanced Special Features Random Security Function (Anti-Theft)
Check the current main clock display. Then, cycle through all 20 programs using the PROG button. If you spot an accidental program, highlight it and press RST/RCL to wipe it out.
If you wish to program more events (e.g., 2 ON , 2 OFF ), continue pressing the button to cycle through the numbers. Once you are completely finished, press the CLOCK button to save your settings and return to the main time display. 5. Utilizing the Manual Override (ON/AUTO/OFF)
The timer can be programmed with up to (“1ON / 1OFF” to “8ON / 8OFF”).
From the > Settings :
