Windows is blocking the driver because of signature verification, or conflicting older Huawei drivers are interfering.
If the automated installer fails, you can force Windows to recognize the driver manually:
You should see a clean entry without any yellow warning flags reading: HUAWEI USB COM 1.0 (COMX) (where X represents the specific port number assigned by Windows). Troubleshooting Common Errors Root Cause Driver conflicts or Driver Signature Enforcement is active.
You have physically opened the phone and shorted the hardware testpoint to force the device into a service mode. huawei usb com 1.0 driver.zip
When a Huawei device cannot boot into its normal operating system, fastboot mode, or recovery mode, it enters a low-level hardware state known as or HUAWEI USB COM 1.0 mode.
Click , then click Browse and navigate to your extracted ZIP folder.
Compatible with older and modern Kirin processors, including Kirin 659, 710, 960, 970, 980, and Kirin 990. Windows is blocking the driver because of signature
Select . Click Have Disk... , then click Browse .
Right-click the .zip file and extract it to a memorable location, like your Desktop, using WinRAR or 7-Zip. Open the extracted folder.
A specialized utility dedicated to flashing bricked Huawei phones directly in USB COM 1.0 mode. You have physically opened the phone and shorted
Right-click on the .inf file (usually named hw_usb_dev.inf ) and select . Alternatively, use the setup.exe if provided in the ZIP. Step 3: Verify in Device Manager To ensure it’s working:
Right-click the detected device with the yellow triangle and select . Click Browse my computer for drivers .
Select .